You may have to give the handle a slight twisting motion to remove it. Unclip the door lock rod retainer clip at the bell crank with a flat tip screw driver.When you have all of these goodies removed, roll the window up all the way and then reach inside the door body to get a good idea of where the attacking point are. You will have to get inside the door so you can access the attaching hardware and latch rod connection this means that you will have to remove the inside door handle and window crank, the door panel and possibly a moisture barrier or water shield. You can adjust the push button depth so the door opens with a shallow or deep push. Put all these things in motion and they release the latch from the door latch striker. When you push the button on the outside door handle it operates a bell crank, that is attached to a rod that operates the door latch. The installation is performed on a 1967 Mustang but it is the same procedures for 1965-1966, 1 Mustangs 1970-73 Mustang door handle are a flush mount – lift style but the operational principals are the same. We’ll be using quality Scott Drake parts for this demonstration provided by none other than Average Joe Restoration Mustang Parts. This article will show you how to do the installation it’s fairly easy to do it yourself. After 40 plus years of operation the outside door handles on a Classic Mustang will not only look pretty drab and dull, they’ll operate poorly and should be replaced.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |